Accessories
Accessories
Depending on the industrial usage and the application, our dust collectors could be equipped with the above mentioned accessories.
- Spark traps
- Cyclone dust collectors
- Extract arms
- Pre-coating
- Partition wall and curtain systems
- Industrial valves (shut-off and switch type)
- Extract and transport fans
- Air ducts and pipes
- Spare filter elements (cartridges, bags, hoses, pockets)
Spark trap
Welding and grinding operations are accompanied by high speed suction posing a potential fire risk.
Using spark trap during these operations prevents the fire and preserves the longer life of filter elements.
Heavy sparks are removed from air flow by centrifugal acceleration. All sparks fall into the collecting container, which is in safety distance from main filters and away from air-distribution system. Collecting container can be easily separated and emptied even during system operation.
Cyclone dust collectors
Cyclone dust collector (cyclone) is used for separation of solid fractions from air. Cyclone can be used separately or as a pre-separation before the filter units.
Cyclone is not suitable for suction of sticky (wet) dust. Efficiency of cyclone separator depends on size and weight of exhausted particles and it might be regulated by valve in pipelines.
Extract arms
Our extraction arms capture the welding fume directly at the source.
Their major benefit of the extraction arms is their flexibility. The operator could very easily adjust them to the source of the fumes or dust.
If they are used according to the instructions, the extraction arms capture the dust before it could enter into the breathing zone of the operator.
They are available in lengths of 1,5 to 9 metres.
