Type MH
These bag dust collectors type MH are designed for the effective dedusting in the most demanding parts of the plants.
Main applications
- dedusting in the cement plants
- dedusting in the lime plants
- air filtration in the foundries
Technical features
- air volume from 3.000 up to 50.000 m3/h
- round bag filter elements or flat hoses
- filter area up to 658 m2
- recovery of the bags with the compressed air
- working temperature up to 150 °C
- the filter housing is designed for a vacuum of 5 kPa
Accessirues
- screw conveyor for the dust transport
- ATEX version
- non-standard temperature design -40 °C
- design for the corrosive environment
Dust collector description
These dust collectors are designed as airtight filters, steel construction. They are produced either with the round filter bags with the cages or with the flat hoses.
The dirty air enter is either through the hopper or the pre-separation chamber.
The dust separation is a two-phase process. In the first phase the large and heavy particles are to be separated by changing the direction of air flow in the hopper or in the pre-separation chamber. In the second phase the rest of the particles are separated on the surface of the filter hoses.
Cleaning - regeneration - of the filter medium is performed by means of short pulses of compressed air and takes place depending on the result of the pressure loss measurement at fixed time intervals or a combination of these variants.
